I am in the midst of a trap out for a woman that can’t afford to pay the usual $400.00 to do a cut out. My wife made the connection with the woman and I was reluctant because I don’t want any part of the work and effort to do a cut out. I hemmed and hawed for a week, then asked for a photo…….good news, the location seemed to lend itself to a simple trap out. My biggest concern is Fall……once out I will need to baby the bees for them to make it through the winter.

The location- in the wall of an out of service cold box with wood clad external sides. Apparently a knot in the wood rotted out and left a very nice 1 inch diameter hole. The flat surface of the cold box simplifies the process. First build the escape cone.

Start with 1/8 inch(#8 hardware cloth), create a cone with an exit hole a little larger than than a pencil thickness. I drilled a 2 5/8 inch hole in a thin piece of plywood, sized so 6 or 7 inches of the cone protruded through. Trimmed the fat end to create wings, covered the wings with duct tape and secured with staples.

The bees were foraging and calm when I installed the cone.

The wire cone and small escape hole is not well seen by the bees complex eyes.after escaping to forage they return and are locked out. They mill around, they smell their hive and scramble trying to find a way back in. Sometimes there are other access holes and they will find a way back in. Fortunately, I got lucky….just a single entry hole.

Now I need to make them comfortable. I have a short topbar box needing bees and it has 4 bars of drawn comb, some old heavily propolized bars and a packet of queen scent. Today was day three and the escapees have found a home. I just hope that the weather holds long enough to starve out the queen. Workers are bringing pollen in and I will add a feeder shortly.

Love watching the girls work and drawing in more recruits. If the weather was warmer I would be tempted to bring this box a bar of eggs and brood. I really need to get the queen to recognize that no resources are coming in and choose to leave. I will give her a little time and may poke another hole to pump some smoke into the cavity to encourage her to leave.

Update….. 8 days later and the bees have found some rotted out wood at the base of the old cold box back around the backside. I have sealed up the area but will have to wait for flying weather after our cold snap to gauge my success. Looking for something north of 50-55 degrees F to check it out.

TTFN

Bishop